Power hammer video, Kinyon

 alt.crafts.blacksmithing    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content
Subject Author Date
Power hammer video, Kinyon Todd Rich 07-06-2008
Posted by Chilla on July 8, 2008, 8:18 am
Please log in for more thread options
Same thing, different name.

Well I was thinking of something simple, like rigging up a large spring
and mounting a sledge hammer there in.

I've been thinking about ways to do it.


Regards Charles

spaco wrote:
> Is a kick hammer like a treadle hammer?
> Do you have a particular design in mind?


Posted by spaco on July 8, 2008, 9:11 am
Please log in for more thread options
I have collected a few pictures of various kinds of treadle hammer. I
can email them to you if you are interested.
Also, there are a couple of plans around for building them.
You can read what I have written on the subject at:

> http://www.spaco.org/trdlhamr.htm


Pete Stanaitis
---------------------------------------

Chilla wrote:
> Same thing, different name.
>
> Well I was thinking of something simple, like rigging up a large spring
> and mounting a sledge hammer there in.
>
> I've been thinking about ways to do it.
>
>
> Regards Charles
>
> spaco wrote:
>
>> Is a kick hammer like a treadle hammer?
>> Do you have a particular design in mind?
>
>

Posted by Chilla on July 8, 2008, 11:30 am
Please log in for more thread options
You can never have too much information... information is my crack ;-)

Regards Charles

spaco wrote:
> I have collected a few pictures of various kinds of treadle hammer. I
> can email them to you if you are interested.
> Also, there are a couple of plans around for building them.
> You can read what I have written on the subject at:
>
>> http://www.spaco.org/trdlhamr.htm


Posted by spaco on July 8, 2008, 11:38 am
Please log in for more thread options
I just sent you an email with the pictures. I tried to keep the sizes
down to manageable.

Pete Stanaitis
-----------------

Chilla wrote:

> You can never have too much information... information is my crack ;-)
>

Posted by bigegg on July 8, 2008, 12:56 pm
Please log in for more thread options

> Chilla wrote:
>
>> You can never have too much information... information is my crack ;-)
>>

I've seen a picture of a flypress converted to be operated by leg power.

Might be worth investigating.

I've been using a (smallish) hand powered type for a couple of years -
contollable enough that I can usually do a full forging without a hand
hammer (I tend to make door and gate hardware, so some big hinges, as
well as door knockers and latches).

I did have a go at making some laminated steel with it (cable damascus,
I believe it's called?), but it didn't turn out so well.

I believe Ron Reill's site has a page on using a flypress as a power
hammer.



--
BigEgg
Hack to size. Hammer to fit. Weld to join. Grind to shape. Paint to cover.
http://www.workshop-projects.com -
Plans and free books - *Now with forum*

Similar ThreadsPosted
FS: Kinyon style air hammer May 4, 2006, 1:45 pm
Built a Kinyon air hammer July 1, 2008, 11:38 am
"How to Set Up and Use a Treadle Hammer" video - anyone seen it? December 11, 2007, 9:56 pm
Re: power hammer December 9, 2005, 10:36 am
Re: power hammer December 12, 2005, 12:21 pm
Power hammer April 5, 2007, 10:40 pm
power hammer which one??????? June 24, 2007, 2:52 am
Power Hammer September 2, 2008, 5:19 am
Power hammer - a little one this time April 28, 2007, 8:26 pm
Power Hammer Questions May 25, 2007, 3:37 pm

The site map in XML format XML site map
Contact Us | Privacy Policy