hammer in

NewsGroups | Search | About

Lost Password?

alt.crafts.blacksmithing

get this group's latest topics as an RSS feed

add this group's latest topics to your My MSN content

add this group's latest topics to your My Yahoo content

Subject

Author

Date

04-21-2006

Re: hammer in

wrenchpuller

04-25-2006

Posted by wrenchpuller on April 21, 2006, 3:17 am

Please log in for more thread options

I would like to take this opportunity to invite all interested persons
to a Hammer In at John Babcock's on Saturday April 29 2006. John's
acreage is located in Cherhill Alberta on highway 43 approximately
100km from Edmonton. John has been smithing for over 60 years and has a
very comprehensive knowledge of all aspects of the trade. John has
pieces of his work on display in several museums in Alberta including
the Royal Museum of Alberta. Focus for this Hammer In is to be small
sellable demonstration items. If you want bring your bring your
favourite hammer and tongs. John has eight forging stations as well as
enough blacksmithing tools to supply them. If you want to come and hit
some hot iron bring yourself and something for the potluck. If there is
enough interest there will be Iron in the Hat. The hammer in will start
with setup as soon as enough people arrive after 9:00 A.M. and will
continue until it is time to put away the toys

Posted by on April 24, 2006, 3:37 pm

Please log in for more thread options

I can't make it to Alberta, but I'd be interested in hearing about the
demonstration items people come up with.

Posted by wrenchpuller on April 25, 2006, 9:41 am

Please log in for more thread options

freemab222@yahoo.com wrote:

> I can't make it to Alberta, but I'd be interested in hearing about the

> demonstration items people come up with.

Dam basterds sent me to work but I will see if I can get a report.

Similar Threads	Posted
DTH( down the hole) hammer drilling, top hammer drilling,drag bit, diamond core drilling tools, core bit, core barrel, guide sleeves, polit bit, drill rod, drill tube, drill bit, casing shoe, rock bit, drilling tools, open pit, open cast, mining, quarryin	September 6, 2006, 4:11 am
Air hammer schematic?	August 7, 2005, 1:53 pm
Re: power hammer	December 9, 2005, 10:36 am
Re: power hammer	December 12, 2005, 12:21 pm
balancing a hammer??	October 2, 2006, 10:16 am
hammer die material	December 21, 2006, 6:22 am
Power hammer	April 5, 2007, 10:40 pm
power hammer which one???????	June 24, 2007, 2:52 am
Power Hammer	September 2, 2008, 5:19 am
FS: Kinyon style air hammer	May 4, 2006, 1:45 pm

XML site map
Contact Us | Privacy Policy